TOPSwitch-HX
Enhanced EcoSmart®, Integrated Off-Line Switcher with Advanced Feature Set and Extended Power Range
Typical Flyback Application
Description:
TOPSwitch-HX incorporates a 700 V power MOSFET, high voltage switched current source, PWM control, oscillator, thermal shutdown circuit, fault protection and other control circuitry onto a monolithic device.
Lower System Cost, Higher Design Flexibility
- Multi-mode operation maximizes efficiency at all loads
- New eSIP-7C and eSIP-7F packages build on PI’s experience with high power and high reliability packages
- No heatsink required up to 35 W (up to 48 W at 230 VAC) using P, G or M packages
- Output overvoltage protection (OVP) is user programmable for latching/non-latching shutdown with fast AC reset
- Line undervoltage (UV) detection prevents turn-off glitches
- Line overvoltage (OV) shutdown extends line surge limit
- Accurate programmable current limit
- Optimized line feed-forward for line ripple rejection
- 132 kHz frequency (254Y-258Y and all E packages) reduces transformer and power supply size (half frequency option for video applications)
- Tight I2f parameter tolerance reduces system cost
- Frequency jittering reduces EMI filter cost
- Heatsink is connected to SOURCE for low EMI
- Improved auto-restart delivers <3% of maximum power in short circuit and open loop fault conditions
- Accurate hysteretic thermal shutdown function automatically recovers without requiring a reset
- Fully integrated soft-start for minimum start-up stress
- Extended creepage between DRAIN and all other pins improves field reliability
EcoSmart®– Energy Efficient
- Energy efficient over entire load range
- No-load consumption
- Less than 200 mW at 230 VAC
- Standby power for 1 W input
- >600 mW output at 110 VAC input
- >500 mW output at 265 VAC input
eSIP (E) Package (eSIP Package Information)
- Low junction-to-case thermal impedance (2 °C per watt)
- Low height is ideal for adapters where space is limited
- Simple clip-mounted heatsink reduces manufacturing cost
- Passes shock and vibration tests to IEC 60068 with clip-mounted heatsink
- eSIP clip and strap manufacturer information
- Supports adapter applications to 118W (177 W at 230VAC)
- External current limit adjustment and remote ON/OFF
- Voltage monitor pin (OV, UV, line feed forward, OVP, reset)
- Selectable switching frequency (132/66 kHz)
Applications:
- LCD monitors
- Personal computers
- Small servers
- Laptop adapters
- Set-top boxes
- Digital TVs
- Printers
- DVD Players and Recorders
- UPS
- Video Games
- Broadband Modems
- Cellular phone adapters
- Audio Amplifiers
| Output Power (Watts) | ||||||
|---|---|---|---|---|---|---|
| PRODUCT5 | 230 VAC ±15% | 85-265 VAC | ||||
| Adpt.1 | OF2 | Peak3 | Adpt. | OF | Peak | |
| TOP252PN TOP252GN TOP 252MN | 9 | 15 | 21 | 6 | 10 | 13 |
| TOP253PN TOP253GN TOP253MN | 15 | 25 | 38 43 | 9 | 15 | 25 29 |
| TOP254PN TOP254GN TOP254MN | 16 | 28 | 47 62 | 11 | 20 | 30 40 |
| TOP255PN TOP255GN TOP255MN | 19 | 30 | 54 81 | 13 | 22 | 35 52 |
| TOP256PN TOP256GN TOP256MN | 21 | 34 | 63 98 | 15 | 26 | 40 64 |
| TOP257PN TOP257GN TOP257MN | 25 | 41 | 70 119 | 19 | 30 | 45 78 |
| TOP258PN TOP258GN TOP258MN | 29 | 48 | 77 140 | 22 | 35 | 50 92 |
| PRODUCT | 230 VAC ±15% | 85-265 VAC | ||||
| Adapt.1 | OF2 | Adapt. | OF | |||
| TOP252EN | 10 | 21 | 6 | 13 | ||
| TOP253EN | 21 | 43 | 13 | 29 | ||
TOP254EN | 30 | 62 | 20 | 43 | ||
| TOP255EN TOP255YN | 40 | 81 | 26 | 57 | ||
| TOP256EN TOP256YN | 60 | 119 | 40 | 86 | ||
| TOP257EN TOP257YN | 85 | 157 | 55 | 119 | ||
| TOP258EN TOP258YN | 105 | 195 | 70 | 148 | ||
| TOP259EN TOP259YN | 128 | 238 | 80 | 171 | ||
| TOP260EN TOP260YN | 147 | 275 | 93 | 200 | ||
TOP260LN | 147 | 190 | 93 | 140 | ||
TOP261EN TOP261YN | 177 | 333 | 118 | 254 | ||
TOP261LN | 177 | 244 | 118 | 177 | ||
TOP262LN | 177 | 244 | 118 | 177 | ||
Notes:
- Minimum continuous power in a typical non-ventilated enclosed adapter measured at +50 °C ambient. Use of an external heat sink will increase power capability.
- Minimum continuous power in an open frame design at +50 °C ambient.
- Peak power capability in any design at +50 °C ambient.
- 230 VAC or 110/115 VAC with doubler.
- Packages: E: eSIP-7C, G: SMD-8C, L: eSIP-7B,
M: SDIP-10C, P: DIP-8C, Y: TO-220-7C.
| Product Documents | |
|---|---|
| Application Notes |  AN-43 |
| Package Information | |
| Data Sheet | |
| Reference Designs* | |
|---|---|
| RDK-142 | 35 W Universal Input, Two-Output (12 V, 2 A and 5V, 2.2A) LCD Monitor Power Supply with >82% full load efficiency and no-load power consumption < 300 mW at 230 VAC |
* DAKs/RDKs include a working power supply, sample devices, unpopulated pcb, data sheet, comprehensive engineering report, PI Expert design software and other related documentation.
Visit the Design Examples page for additional circuits using this product family.
| EcoSmart® - Energy-Efficiency Technology |
|---|
|
